[1] Ramezanianpour A, Esmaeili K, Ghahari S, Ramezanianpour A. Influence of initial steam curing and different types of mineral additives on mechanical and durability properties of self-compacting concrete. Construction and building materials. 2014; 73: 187-194. doi: 10.1016/j.conbuildmat.2014.09.072

[2] Ramezanianpour AA. Cement replacement materials, Properties, Durability, Sustainability. Berlin, Heidelberg: Springer; 2014.

[3] Reddy MS, Dinakar P, Rao BH. A review of the influence of source material’s oxide composition on the compressive strength of geopolymer concrete. Microporous and Mesoporous Materials. 2016; 234: 12-23. doi: 10.1016/j.micromeso.2016.07.005

[4] Kupaei RH, Alengaram UJ, Jumaat MZB, Nikraz H. Mix design for fly ash based oil palm shell geopolymer lightweight concrete. Construction and Building Materials. 2013; 43: 490-496. doi: 10.1016/j.conbuildmat.2013.02.071

[5] Posi P, Ridtirud C, Ekvong C, Chammanee D, Janthowong K, Chindaprasirt P. Properties of lightweight high calcium fly ash geopolymer concretes containing recycled packaging foam. Construction and Building Materials. 2015; 94: 408-413. doi: 10.1016/j.conbuildmat.2015.07.080

[6] Posi P, Teerachanwit C, Tanutong C, Limkamoltip S, Lertnimoolchai S, Sata V, Chindaprasirt P. Lightweight geopolymer concrete containing aggregate from recycle lightweight block. Materials & Design (1980-2015). 2013 Dec 1; 52: 580-586. doi: 10.1016/j.matdes.2013.06.001

[7] Mermerdaş K, Algın Z, Ekmen Ş. Experimental assessment and optimization of mix parameters of fly ash-based lightweight geopolymer mortar with respect to shrinkage and strength. Journal of Building Engineering. 2020; 31: 101351. doi: 10.1016/j.jobe.2020.101351

[8] Oleiwi SM, Algın Z, Nassani DE, Mermerdaş K. Multi-objective optimization of alkali activator agents for FA-and GGBFS-based geopolymer lightweight mortars. Arabian Journal for Science and Engineering. 2018; 43: 5333-5347. doi: 10.1007/s13369-018-3170-x

[9] Öztürk O. Engineering performance of reinforced lightweight geopolymer concrete beams produced by ambient curing. Structural Concrete. 2022; 23(4): 2076-2087. doi: 10.1002/suco.202000664

[10] Hema P, Revathi V. Durability evaluation of GGBS-RHA-based geopolymer concrete along with lightweight expanded clay aggregate using SEM images and EDAX analysis. Buildings. 2024; 14(11): 3355. doi: 10.3390/buildings14113355

[11] Abbas W, Khalil W, Nasser I. Production of lightweight Geopolymer concrete using artificial local lightweight aggregate. InMATEC Web of Conferences. 2018; 162: 02024. doi: 10.1051/matecconf/201816202024

[12] Kumar V, Kumar PJ. Self-compacted geopolymer concrete incorporating waste ceramic powder. Multiscale and Multidisciplinary Modeling, Experiments and Design. 2024; 7: 1-16. doi: 10.1007/s41939-024-00510-7

[13] Kumar NK, Reddy IR. A study on the effect of NaOH molarity on flyash based self compacting geopolymer concrete. Materials Today: Proceedings. 2023. doi: 10.1016/j.matpr.2023.03.144

[14] Ghafoor MT, Fujiyama C. Mix design process for sustainable self-compacting geopolymer concrete. Heliyon. 2023; 9(11). doi: 10.1016/j.heliyon.2023.e22206

[15] Saini G, Vattipalli U. Assessing properties of alkali activated GGBS based self-compacting geopolymer concrete using nano-silica. Case Studies in Construction Materials. 2020; 12: e00352. doi: 10.1016/j.cscm.2020.e00352

[16] Kanagaraj B, Anand N, Praveen B, Kandasami S, Lubloy E, Naser M. Physical characteristics and mechanical properties of a sustainable lightweight geopolymer based self-compacting concrete with expanded clay aggregates. Developments in the Built Environment. 2023; 13: 100115. doi: 10.1016/j.dibe.2022.100115

[17] Rahmanpour M, Afshin H. The combined retrofitting of reinforced light structural concrete beams in near joint by using of steel plates and CFRP jacket under cycling loads. Concrete Research. 2016; 9(1): 71-82. [In Persian]

[18] Khanzadi M, Chalekaee A. Property improvement of iranian LWAC: investigation of mechanical properties and stress-strain curve. Modares Civil Engineering journal. 2012; 12(4): 79-89. [In Persian]

[19] Kılıç A, Atiş CD, Yaşar E, Özcan F. High-strength lightweight concrete made with scoria aggregate containing mineral admixtures. Cement and Concrete Research. 2003; 33(10): 1595-1599. doi: 10.1016/S0008-8846(03)00131-5

[20] EFNARC, The European Guidelines for Self-Compacting Concrete. Specification, Production and Use. Switzerland, 2005.

[21] ACI 237R-07. Self-Consolidating Concrete. American Concrete Institute Farmington Hills, MI, USA; 2007.

[22] INSO 1608. Hardened Concrete- Part 3: Compressive Strength of Test Specimens- Test Method. Iranian National Standardization Organization; 2015.

[23] ASTM C496. Standard Test Method for Splitting Tensile Strength of Cylindrical Concrete Specimens. West Conshohocken, PA 19428-2959, United States.

[24] ASTM C642. Standard Test Method for Density, Absorption, and Voids in Hardened Concrete. West Conshohocken, PA 19428-2959, United States.

[25] Diawara H. Parametric study of self-consolidating concrete, Doctor of Philosophy (PhD) Thesis, University of Nevada, Las Vegas, USA, 2008.

[26] Arun BR, Nagaraja PS, Srishaila JM. An effect of NaOH molarity on fly ash- Metakaolin-based self-compacting geopolymer concrete. InSustainable construction and building materials: Select Proceedings of ICSCBM. 2018 Dec 31; 233-244. doi: 10.1007/978-981-13-3317-0_21

[27] Kalyana Rama J, Reshmi N, Sivakumar M, Vasan A. Experimental investigation and numerical validation on the effect of NaOH concentration on GGBS based self-compacting geopolymer concrete. Advances in Structural Engineering: Materials. New Delhi: Springer; 2015. doi: 10.1007/978-81-322-2187-6_127

[28] Sathonsaowaphak A, Chindaprasirt P, Pimraksa K. Workability and strength of lignite bottom ash geopolymer mortar. Journal of Hazardous Materials. 2009; 168(1): 44-50. doi: 10.1016/j.jhazmat.2009.01.120

[29] Madandoust R, Ranjbar MM, Mousavi SY. An investigation on the fresh properties of self-compacted lightweight concrete containing expanded polystyrene. Construction and Building Materials. 2011; 25(9): 3721-3731. doi: 10.1016/j.conbuildmat.2011.04.018

[30] ACI 213R-03. Guide for structural lightweight‐aggregate concrete. ACI Committee 213. American Concrete Institute, Farmington Hills, MI, USA; 2003.

[31] Dolatabad YA, Kamgar R, Tazangi MAJ. Effects of perlite, leca, and scoria as lightweight aggregates on properties of fresh and hard self-compacting concretes. Journal of Advanced Concrete Technology. 2020; 18(10): 633-647. doi: 10.3151/jact.18.633

[32] Mohseni E, Kazemi MJ, Koushkbaghi M, Zehtab B, Behforouz B. Evaluation of mechanical and durability properties of fiber-reinforced lightweight geopolymer composites based on rice husk ash and nano-alumina. Construction and building materials. 2019; 209: 532-540. doi: 10.1016/j.conbuildmat.2019.03.067

[33] Shadnia R, Zhang L. Experimental study of geopolymer synthesized with class F fly ash and low-calcium slag. Journal of materials in civil engineering. 2017; 29(10): 04017195. doi: 10.1061/(ASCE)MT.1943-5533.0002065

[34] Khan KA, Raut A, Chandrudu CR, Sashidhar C. Design and development of sustainable geopolymer using industrial copper byproduct. Journal of Cleaner Production. 2021; 278: 123565. doi: 10.1016/j.jclepro.2020.123565