[1] Rahimi, H. (2013). Investigation of Behavior and Vulnerability of Metal Buildings by Convergent Chevron Inhibition with Friction Damping of Energy Purification, MSc Thesis, Faculty of Engineering, University of Chamran martyr. [In Persian]

[2] Ghorbanpour, B., Khalil Pasha, M. H., & Jahani, Z. (2011). Study of Types of Frames and Structural Systems in Steel Buildings, The First Regional Conference on Civil Engineering, Joibar, Islamic Azad University, Joibar Branch. [In Persian]

[3] Rezaeian, S., Al Atik, L., Kuehn, N. M., Abrahamson, N., Bozorgnia, Y., Mazzoni, S., ... & Campbell, K. (2021). Spectral damping scaling factors for horizontal components of ground motions from subduction earthquakes using NGA-Subduction data. Earthquake Spectra, 37(4), 2453-2492. doi: 10.1177/87552930211027903

[4] Davarnia, D., & Farahmand Azar, B. (2020). A new method for scaling of earthquake records using input energy of structures. The Structural Design of Tall and Special Buildings, 29(9), e1736. doi: 10.1002/tal.1736

[5] Dávalos, H., & Miranda, E. (2019). Evaluation of the scaling factor bias influence on the probability of collapse using S a (T1) as the intensity measure. Earthquake Spectra, 35(2), 679-702. doi: 10.1193/011018EQS007M

[6] Watson-Lamprey, J., & Abrahamson, N. (2006). Selection of ground motion time series and limits on scaling. Soil Dynamics and Earthquake Engineering, 26(5), 477-482. doi: 10.1016/j.soildyn.2005.07.001

[7] Cavdar, E., Ozdemir, G., & Bayhan, B. (2019). Significance of ground motion scaling parameters on amplitude of scale factors and seismic response of short-and long-period structures. Earthquake Spectra, 35(4), 1663-1688. doi: 10.1193/081718eqs204m

[8] Huff, T. (2020). Importance of target spectrum basis in earthquake ground motion scaling. Practice Periodical on Structural Design and Construction, 25(1), 04019034. doi: 10.1061/(ASCE)SC.1943-5576.0000461

[9] Bahari, H., & Mortezaei, A. (2021). Influence of Geographic Scaling of Regional Ground Motions on the Moment Resisting RC buildings. Geography (Regional Planning), 11(44), 605-620. doi: 10.22034/jgeoq.2021.137388

[10] Shome, N., Cornell, C. A., Bazzurro, P., & Carballo, J. E. (1998). Earthquakes, records, and nonlinear responses. Earthquake spectra, 14(3), 469-500. doi: 10.1193/1.1586011

[11] Reyes, J. C., & Chopra, A. K. (2012). Modal pushover-based scaling of two components of ground motion records for nonlinear RHA of structures. Earthquake Spectra, 28(3), 1243-1267. doi: 10.1193/1.4000069

[12] Reyes, J. C., & Kalkan, E. (2012). How many records should be used in an ASCE/SEI-7 ground motion scaling procedure?. Earthquake Spectra, 28(3), 1223-1242. doi: 10.1193/1.4000066

[13] Reyes, J. C., & Quintero, O. A. (2014). Modal pushover‐based scaling of earthquake records for nonlinear analysis of single‐story unsymmetric‐plan buildings. Earthquake engineering & structural dynamics, 43(7), 1005-1021. doi: 10.1002/eqe.2384

[14] Ergun, M., & Ates, S. (2014). Comparing of the effects of scaled and real earthquake records on structural response. Earthquakes and Structures, 6(4), 375-392. doi: 10.12989/eas.2014.6.4.375

[15] Wang, J. H. (2018). A review on scaling of earthquake faults. Terrestrial, Atmospheric & Oceanic Sciences, 29(6), 589-610. doi: 10.3319/TAO.2018.08.19.01

[16] Melgar, D., Crowell, B. W., Geng, J., Allen, R. M., Bock, Y., Riquelme, S., ... & Ganas, A. (2015). Earthquake magnitude calculation without saturation from the scaling of peak ground displacement. Geophysical Research Letters, 42(13), 5197-5205. doi: 10.1002/2015GL064278

[17] Trugman, D. T., & Shearer, P. M. (2017). Application of an improved spectral decomposition method to examine earthquake source scaling in Southern California. Journal of Geophysical Research: Solid Earth, 122(4), 2890-2910. doi: 10.1002/2017JB013971

[18] Mortezaei, A., & Ronagh, H. R. (2013). Effectiveness of modified pushover analysis procedure for the estimation of seismic demands of buildings subjected to near-fault ground motions having fling step. Natural Hazards and Earth System Sciences, 13(6), 1579-1593. doi: 10.5194/nhess-13-1579-2013

[19] Valamanesh, V., & Estkanchi, H. (2003). Study of Criteria for Multidirectional Seismic Analysis of Structures, Journal of Civil Engineering, Islamic Azad University. [In Persian]

[20] National Building Regulations of Iran. (2021). Design and Execution of Steel Buildings, Edition 4, Office of National Building Regulations. [In Persian]

[21] Taghinezhad, R. (2015). Seismic Design and Rehabilitation of Structures Based on Performance Level With SAP2000 and ETABS Pushover Analysis. [In Persian]

[22] Iraninan Code of Practice For Seismic Resistant Design of Buldings, Standadr No.2800,(4th Edition).

[23] Abolhassani, J., & Fallahi F. (2013). Comparison between IBC, UBC and 2800 regulations in analyzing the modal spectral response performed on standard residential buildings, 7th National Congress of Civil Engineering, Shahid Nikbakht Faculty of Engineering, Zahedan. [In Persian]

[24] ASCE Standard ASCE/SEI 7. (2010). American Society of Civil Engineers–“Minimum design loads for buildings and other structures.

[25] Code, U. B. (2015). International building code. International Code Council, USA.

[26] UBC-97. (1997). In Structural engineering design provisions. International conference of building officials, Whittier, California.

[27] Jooqan, S., Badri, H., & Daneshjoo, F. (2009). Comparison of increasing nonlinear static analysis methods and productive nonlinear dynamics in steel bending frames, 8th International Congress of Civil Engineering, Shiraz University. [In Persian]

[28] Mortezaei, A. (2014). Plastic hinge length of RC columns under the combined effect of near-fault vertical and horizontal ground motions. Periodica Polytechnica Civil Engineering, 58(3), 243-253. doi: 10.3311/PPci.7329 

[29] ASCE 41-16. (2016). Minimum Design Loads for Building and Other Structures, American Society of Civil Engineers (ASCE).