[1] Haghshenas, H., et al., Research on high-rap asphalt mixtures with rejuvenators and WMA additives. 2016, Nebraska Department of Transportation Research Reports. 146: Nebraska - Lincoln.

[2] Haghshenas, H., et al., Research on High-RAP Asphalt Mixtures with Rejuvenators-Phase II. 2019, Nebraska Department of Transportation Research Reports. 217: Nebraska - Lincoln.

[3] Haghshenas, H.F., et al., Chemical Characterization of Recycling Agents. Journal of Materials in Civil Engineering, 2020. 32(5): p. 06020005.

[4] Behnood, A., Application of rejuvenators to improve the rheological and mechanical properties of asphalt binders and mixtures: A review. Journal of Cleaner Production, 2019. 231(Sep): p. 171-182.

[5] Haghshenas, H.F., et al., Effect of softening additives on the moisture susceptibility of recycled bituminous materials using chemical-mechanical-imaging methods. Journal of Materials in Civil Engineering, 2018. 30(9): p. 04018207.

[6] Zhou, F., et al., High RAP mixes design methodology with balanced performance. FHWA/TX-11/0-6092-2 2011, United States. Federal Highway Administration: Texas Transportation Institute, College Station, Texas. .

[7] Parnell, N.D., The Development of Initial Asphalt Mixture Acceptance Criteria Using the SCB test and the I-FIT Test. 2019: University of Arkansas.

[8] Zaumanis, M., L. Poulikakos, and M. Partl, Performance-based design of asphalt mixtures and review of key parameters. Materials & Design, 2018. 141: p. 185-201.

[9] Yin, F., et al., Performance Testing for Quality Control and Acceptance of Balanced Mix Design, NCAT Report 20-02. 2020, National Center for Asphalt Technology (NCAT): Auburn University, Auburn, Alabama.

[10] Newcomb, D. and F. Zhou, Balanced Design of Asphalt Mixtures, MN/RC 2018-22. 2018, Minnesota Department of Transportation Research Services & Library: Minnesota.

[11] Monismith, C., J. Epps, and F. Finn, Improved asphalt mix design (with discussion), in Association of Asphalt Paving Technologists Proc. 1985, Association of Asphalt Paving Technologists (AAPT), Vol. 54. p. 340-406.

[12] Zhou, F., S. Hu, and T. Scullion, Integrated asphalt (overlay) mixture design, balancing rutting and cracking requirements, FHWA/TX-06/0-5123-1. 2006, Texas Transportation Institute, Texas A & M University System: College Station, Texas 

[13] Dong, W. and S. Charmot, Proposed tests for cold recycling balanced mixture design with measured impact of varying emulsion and cement contents. Journal of Materials in Civil Engineering, 2018. 31(2): p. 04018387.

[14] Zhou, Z., et al., Rutting and fatigue cracking performance of SBS-RAP blended binders with a rejuvenator. Construction and Building Materials, 2019. 203(Apr): p. 294-303.

[15] Ali, U.M., et al. Three-dimensional balanced mix design for asphalt concrete. in International Airfield and Highway Pavements Conference 2019: Design, Construction, Condition Evaluation, and Management of Pavements. 2019. American Society of Civil Engineers (ASCE).

[16] Im, S., P. Karki, and F. Zhou, Development of new mix design method for asphalt mixtures containing RAP and rejuvenators. Construction and Building Materials, 2016. 115(Jul): p. 727-734.

[17] Barros, L., et al., Implications of Including Reclaimed Asphalt Pavement Materials to Performance of Balanced Asphalt Concrete Mixes. Transportation Research Record, 2019: p. 0361198119875666.

[18] Sabouri, M., Evaluation of performance-based mix design for asphalt mixtures containing Reclaimed Asphalt Pavement (RAP). Construction and Building Materials, 2020. 235(Feb): p. 117545.

[19] Espinoza-Luque, A.F., I.L. Al-Qadi, and H. Ozer, Optimizing rejuvenator content in asphalt concrete to enhance its durability. Construction and Building Materials, 2018. 179(Aug): p. 642-648.

[20] Zaumanis, M., et al., Performance-based design of 100% recycled hot-mix asphalt and validation using traffic load simulator. Journal of Cleaner Production, 2019. 237(Nov): p. 117679.

[21] Meroni, F., et al., Application of balanced mix design methodology to optimize surface mixes with high-RAP content. Materials, 2020. 13(24): p. 5638.

[22] Al-Khayat, H., et al., Evaluation of the Minnesota Asphalt Mixtures Based on Balanced Mix-Design Approach. Journal of Transportation Engineering, Part B: Pavements, 2021. 147(3): p. 04021045.

[23] Izaks, R., et al., Hot mix asphalt with high RAP content. Procedia Engineering, 2015. 114(2015): p. 676-684.

[24] Zaumanis, M. and R.B. Mallick, Review of very high-content reclaimed asphalt use in plant-produced pavements: state of the art. International Journal of Pavement Engineering, 2015. 16(1): p. 39-55.

[25] Saride, S., D. Avirneni, and S.C.P. Javvadi, Utilization of reclaimed asphalt pavements in Indian low-volume roads. Journal of Materials in Civil Engineering, 2016. 28(2): p. 04015107.

[26] Al-Qadi, I.L., et al., Impact of high RAP contents on structural and performance properties of asphalt mixtures, Report No: FHWA-ICT-12-002 2012, Illinois Center for Transportation, Rantoul, IL.

[27] AASHTO, Standard Specification for Superpave Volumetric Mix Design. AASHTO M 323. 2017, AASHTO: Washington, D.C.

[28] AASHTO, Standard Practice for Superpave Volumetric Design for Asphalt Mixtures. AASHTO R 35. 2015, AASHTO: Washington, DC.

[29] AASHTO-PP105, Standard Practice for Balanced Design of Asphalt Mixtures 2020, American Association of State Highway and Transportation Officials, Washington, DC:AASHTO.

[30] AASHTO, Standard Specification for Balanced Mix Design. AASHTO MP 46. 2020, AASHTO: Washington, DC.

[31] Chen, A., et al., Research on the aging and rejuvenation mechanisms of asphalt using atomic force microscopy. Construction and Building Materials, 2018. 167: p. 177-184.

[32] AASHTO-T324, Standard Method of Test for Hamburg Wheel-Track Testing of Compacted Asphalt Mixtures 2017, American Association of State Highway and Transportation Officials, Washington, DC:AASHTO.

[33] AASHTO-R30, Standard Practice for Mixture Conditioning of Hot Mix Asphalt (HMA) 2015, American Association of State Highway and Transportation Officials, Washington, DC:AASHTO.

[34] AASHTO-TP124, Standard Method of Test for Determining the Fracture Potential of Asphalt Mixtures Using Semicircular Bend Geometry (SCB) at Intermediate Temperature 2016, American Association of State Highway and Transportation Officials, Washington, DC:AASHTO.

[35] Al-Qadi, I.L., et al., Development of long-term aging protocol for implementation of the Illinois flexibility index test (I-FIT).FHWA-ICT-19-009. 2019, Illinois Center for Transportation/Illinois Department of Transportation, Urbana.

[36] Yousefi, A., et al., Performance evaluation of asphalt mixtures containing warm mix asphalt (WMA) additives and reclaimed asphalt pavement (RAP). Construction and Building Materials, 2021. 268: p. 121200.

[37] Ozer, H., et al., Evaluation of I-FIT results and machine variability using MnRoad test track mixtures. 2017, Illinois Center for Transportation.

[38] Chen, C., Validation of Laboratory Cracking Tests for Field Top-down Cracking Performance. 2020, Auburn University.

[39] Zhou, Z., et al., Investigation of the oxidation ageing of RAP asphalt blend binders and mixtures. International Journal of Pavement Engineering, 2022. 23(3): p. 571-587.

[40] Bajaj, A., et al., Evaluation and classification of recycling agents for asphalt binders. Construction and Building Materials, 2020. 260: p. 119864.

[41] Xie, Z., et al., Laboratory evaluation of effect of addition methods of rejuvenators on properties of recycled asphalt mixtures. Journal of Materials in Civil Engineering, 2020. 32(5): p. 04020101.

[42] Yin, F., et al., Characterising the long-term rejuvenating effectiveness of recycling agents on asphalt blends and mixtures with high RAP and RAS contents. Road Materials and Pavement Design, 2017. 18(sup4): p. 273-292.