[1] Zaman, M., Solanki, P., Ebrahimi, A., & White, L. (2010). “Neural Network Modeling of Resilient Modulus Using Routine Subgrade Soil Properties”, International Journal of Geomechanics, 10(1), 1-12.

[2] AASHTO. (1993). AASHTO Guide for Design of Pavement Structures 1993. American Association of State Highway and Transportation Officials, 1, Washington, D.C.

[3] Natinal Cooperative Highway Research Program. (2004). Guide for Mechanistic-Empirical Design of New and Rehabilitated Pavement Structures. ARA, Inc., ERES Division.

[4] Gudishala, R. (2004). “Development of resilient modulus prediction models for base and subgrade pavement layers from in situ devices test results”, Louisiana State University Master's Theses. 3929.

[5] Hicks, R., & Monismith, C. (1971). “Factors influencing the resilient response of granular materials”, Highway Research Record, 345, 15-31.

[6] Kim, W., Labuz, J. (2007). Resilient Modulus and Strength of Base Course with Recycled Bituminous Material. Minnesota Department of Transportation, Research Services Section. Retrieved from the University of Minnesota Digital Conservancy, https://hdl.handle.net/11299/5567.

[7] Kim, S.H., Yang, J., & Jeong, J. (2014). “Prediction of subgrade resilient modulus using artificial neural network”, KSCE Journal of Civil Engineering, 18(5), 1372-1379.

[8] NCHRP. (2004). National Cooperative Highway Research Program. Guide for Mechanisticempirical Design of New and Rehabilitated Pavement Structures. Part 2, Design Inputs. Final Rep. No. NCHRP 1-37A, Washington, D.C.

[9] Drumm, E. C., Boateng-Poku, Y., & Johnson Pierce, T. (1990). “Estimation of subgrade resilient modulus from standard tests”, Journal of Geotechnical Engineering, 116(5), 774-789.

[10] Kim, D. G. (1999). Engineering properties affecting the resilient modulus of fine-grained soils as subgrade. Doctoral dissertation, The Ohio State University.

[11] George, K. P. (2004). Prediction of resilient modulus from soil index properties (No. FHWA/MS-DOT-RD-04-172). University of Mississippi.

[12] Andrei, D., Witczak, M. W., Schwartz, C. W., & Uzan, J. (2004). “Harmonized resilient modulus test method for unbound pavement materials”, Transportation Research Record, 1874(1), 29-37.

[13] Kim, D., & Kim, J. R. (2007). “Resilient behavior of compacted subgrade soils under the repeated triaxial test”, Construction and Building Materials, 21(7), 1470-1479.

[14] Mazari, M., Navarro, E., Abdallah, I., & Nazarian, S. (2014). “Comparison of numerical and experimental responses of pavement systems using various resilient modulus models”, Soils and Foundations, 54(1), 36-44.

[15] Park, H. I., Kweon, G. C., & Lee, S. R. (2009). “Prediction of resilient modulus of granular subgrade soils and subbase materials using artificial neural network”, Road Materials and Pavement Design, 10(3), 647-665.

[16] Heidarabadizadeh, N., Ghanizadeh, A. R., & Behnood, A. (2021). “Prediction of the resilient modulus of non-cohesive subgrade soils and unbound subbase materials using a hybrid support vector machine method and colliding bodies optimization algorithm”, Construction and Building Materials, 275, 122140.

[17] Ghanizadeh, A. R., & Rahrovan, M. (2016). “Application of artifitial neural network to predict the resilient modulus of stabilized base subjected to wet dry cycles”, Comput. Mater. Civ. Eng, 1, 37-47.

[18] Ghanizadeh, A. R., Heidarabadizadeh, N., & Heravi, F. (2021). “Gaussian Process Regression (GPR) for Auto-Estimation of Resilient Modulus of Stabilized Base Materials”, Journal of Soft Computing in Civil Engineering, 5(1), 80-94.

[19] Heukelom, W., & Klomp, A. (1962). “Dynamic Testing as a Means of Controlling Pavements During and after Construction”, 203(1), 495-510.

[20] Duncan, J., & Buchignani, A. (1976). An Engineering Manual for Settlement Studies. University of California, Berkeley CA. University of California, Berkeley CA.

[21] Mohammad, L., Titi, H., & Herath, A. (1999). “Evaluation of resilient modulus of subgrade soil by cone penetration test”, Transportation Research Record, 1(1652), 236-245.

[22] Mohammad, L., Titi, H., & Herath, A. (2002). Effect of moisture content and dry unit weight on the resilient modulus of subgrade soils predicted by cone penetration test. Washington, DC: Publication FHWA-LA-00-355. U.S. Department of Transportation, FHWA.

[23] Dehler, W., & Labuz, J. (2007). Cone Penetration Testing In Pavement Design. Minnesota Department of Transportation. Minnesota Department of Transportation, Research Services Section. Retrieved from https://hdl.handle.net/11299/5590

[24] Mohammad, L., Herath, A., Abu-Farsakh, M., Gaspard, K., & Gudishala, R. (2007). “Prediction of Resilient Modulus of Cohesive Subgrade Soils from Dynamic Cone Penetrometer Test Parameters”, Journal of Materials in Civil Engineering, 19(11), 986-992.

[25] Sadrossadat, E., Ghorbani, B., Zohourian, B., Kaboutari, M., & Rahimzadeh Oskooei, P. (2020). “Predictive modelling of the MR of subgrade cohesive soils incorporating CPT-related parameters through a soft-computing approach”, Road Materials and Pavement Design, 21(3), 701-719.

[26] Liu, S., Zou, H., Cai, G., Bheemasetti, T. V., Puppala, A. J., & Lin, J. (2016). “Multivariate correlation among resilient modulus and cone penetration test parameters of cohesive subgrade soils”, Engineering Geology, 209, 128-142.

[27] Puppala, A. J., Acar, Y. B., & Tumay, M. T. (1995). “Cone Penetration in Very Weakly Cemented Sand”, Journal of Geotechnical Engineering, 121(8), 589-600.

[28] Lunne, T., Robertson, P., & Powell, J. J. (1997). Cone Penetration Testing in Geotechnical Practice. London: Blackie Academic and Professional, CRC Press.

[29] Mayne, P. W. (2007). Cone penetration testing: a synthesis of highway practice. Washington, D.C.: NCHRP Synthesis 368. Transportation Research Board, National Academies Press, Washington, D.C.

[30] Liu, S., Cai, G., Puppala, A. J., & Tu, Q. (2011). “Prediction of embankment settlements over marine clay using piezocone penetration tests”, Bulletin of Engineering Geology and the Environment, 70(3), 401-409.

[31] Cai, G., Liu, S., Puppala, A. J., & Tong, L. (2011). “Assessment of the coefficient of lateral earth pressure at rest (K o) from in situ seismic tests”, Geotechnical Testing Journal, 34(4), 310-320.

[32] Cai, G., Liu, S., & Puppala, A. J. (2012). “Reliability assessment of CPTU-based pile capacity predictions in soft clay deposits”, Engineering Geology, 141-142, 84-91.

[33] Cai, G., Puppala, A. J., & Liu, S. (2014). “Characterization on the correlation between shear wave velocity and piezocone tip resistance of Jiangsu clays”, Engineering Geology, 171, 96-103.

[34] Olsen, R. S. (1994). Normalization and prediction of geotechnical properties using the cone penetrometer test (CPT). University of California, Berkeley.

[35] Hassan, A. B. (1996). The effects of material parameters on Dynamic Cone Penetrometer results for fine-grained soils and granular materials. Oklahoma: Oklahoma State University Stillwater.

[36] George, K. P., & Uddin, W. (2000). Subgrade characterization for highway pavement design. Final Report. Jackson: Mississippi Department of Transportation.

[37] Herath, A., Mohammad, L. N., Gaspard, K., Gudishala, R., & Abu-Farsakh, M. Y. (2005). “The use of dynamic cone penetrometer to predict resilient modulus of subgrade soils”, In Advances in pavement engineering, 1-16

[38] Zou, H., Liu, S., Cai, G., Puppala, A. J., & Bheemasetti, T. V. (2017). “Multivariate correlation analysis of seismic piezocone penetration (SCPTU) parameters and design properties of Jiangsu quaternary cohesive soils”, Engineering Geology, 228, 11-38.

[39] Zhang, Y., Li, T., & Wang, Y. (2011). “Theoretical elastic solutions for foundations improved by geosynthetic-encased columns”, Geosynthetics International, 18(1), 12-20.

[40] Zhang, W. (2020). “MARS use in prediction of collapse potential for compacted soils”, In MARS applications in geotechnical engineering systems, Springer, Singapore, 27-46.

[41] Ghorbani, B., Arulrajah, A., Narsilio, G., Horpibulsuk, S., & Bo, M. W. (2020). “Hybrid Formulation of Resilient Modulus for Cohesive Subgrade Soils Utilizing CPT Test Parameters”, Journal of Materials in Civil Engineering, 32(9), 06020011.

[42] Giustolisi, O., & Savic, D. A. (2006). “A symbolic data-driven technique based on evolutionary polynomial regression”, Journal of Hydroinformatics, 8(3), 207-222.

[43] Giustolisi, O., & Savic, D. (2009). “Advances in data-driven analyses and modelling using EPR-MOGA”, Journal of Hydroinformatics, 11(3-4), 225-236.

[44] Liu, S., Zou, H., Cai, G., Bheemasetti, T. V., Puppala, A. J., & Lin, J. (2016). “Multivariate correlation among resilient modulus and cone penetration test parameters of cohesive subgrade soils”, Engineering Geology, 209, 128-142.

[45] ASTM D5778. (2012). International Standard Test Method for Electronic Friction Cone and Piezocone Penetration Testing of Soils. Annual Book of ASTM Standards. ASTM International, West Conshohocken, PA.

[46] ISSMFE, I. (1989). Report of the ISSMFE Technical Committee on Penetration Testing of Soils -TC 16 with Reference Test Procedures. International Society for Soil Mechanics and Foundation Engineering.

[47] Ghani, A., Shahin, M., & Nikraz, H. (2012). “Use of Evolutionary Polynomial Regression (EPR) for Prediction of Total Sediment Load of Malaysian Rivers”, International Journal of Engineering, 6(5), 262-277.

[48] AASHTO T307. (2003). Determining the Resilient Modulus of Soils and Aggregate Materials. American Association of State Highway and Transportation Officials, Washington, DC. Standard Specifications for Transportation Materials and Methods of Sampling and Testing, Washington, D.C.