[1] Nonveiller, E. (1989). Grouting theory and practice. Development of Geotechnical Engineering, Elsevier.
[2] Louis, C. (1974). Introduction al’hydraulique des roches. Bull BRGM, III, 4:283–356.
[3] Priest, P. (1993). Discontinuity Analysis for Rock Engineering. Chapman and Hall.
[4] Bell, G. (2000). Engineering Properties of Soil and Rocks. Blackwell science, 4th edition.
[5] Foyo, A., Sánchez, M. A., & Tomillo, C. (2005). “A proposal for a secondary permeability index obtained from water pressure tests in dam foundations”, Engineering geology, 77(1), 69-82.
[6] Yang, M. J., Yue, Z. Q., Lee, P. K., Su, B., & Tham, L. G. (2002). “Prediction of grout penetration in fractured rocks by numerical simulation”, Canadian geotechnical journal, 39(6), 1384-1394.
[7] Hosseiny Sohi, S. M., Koch, M., & Ashjari, J. (2017). “Evaluating permeability and groutability at Karun 4 dam Iran using Lugeon values and grout Take”, In Symposium Proceeding of 85th Annual Meeting of Interna-tional Commission on Large Dams, Prague.
[8] Jones, B. R., Van Rooy, J. L., & Mouton, D. J. (2019). “Verifying the ground treatment as proposed by the Secondary Permeability Index during dam foundation grouting”, Bulletin of Engineering Geology and the En-vironment, 78(3), 1305-1326.
[9] Zolfaghari, A., Sohrabi-Bidar, A., Maleki Javan, M. R., Haftani, M., & Mahinrad, A. (2015). “Evaluation of rock mass improvement due to cement grouting by Q-system at Bakhtiary dam site”, International Journal of Rock Mechanics and Mining Sciences, 74(1), 38-44.
[10] Lunn, R. J., Corson, L. T., Howell, C., El Mountassir, G., Reid, C., & Harley, S. L. (2018). “Could magnetic properties be used to image a grouted rock volume?”, Journal of Applied Geophysics, 155(2018), 162–175.
[11] Ganjalipour, K., & Esmailzadeh, M. (2019). “Numerical modeling for evaluating grout curtain depth and providing a new approach for calculating the efficiency based on installation position of piezometers around sealing system”, Modeling Earth Systems and Environment, 5, 1587–1605,
[12] Zhang, W., Li, S., Wei, J., Zhang, Q., Liu, R., Zhang, X., & Yin, H. (2018). “Grouting rock fractures with ce-ment and sodium silicate grout”, Carbonates Evaporites, 33, 211–222.
[13] Liu, Q., Xiao, F., & Zhao, Z. (2020). “Grouting knowledge discovery based on data mining”, Tunnelling and Underground Space Technology, 95, 103093, https://doi.org/10.1016/j.tust.2019.103093.
[14] Gustafson, G., Claesson, J., & Fransson, Å. (2013). “Steering Parameters for Rock Grouting”, Journal of Applied Mathematics, 2013, Article ID 269594, https://doi.org/10.1155/2013/269594.
[15] Sohrabi-Bidar, A., Rastegar-Nia, A., & Zolfaghari, A. (2016). “Estimation of the grout take using empirical relationships (case study: Bakhtiari dam site)”, Bull Eng Geol Environ, 75, 425–438.
[16] Fan, G., Zhong, D., Wang, J., & Ren, B. (2016). “Cement Take Evaluation and Prediction based on Empiri-cal Relationships and Support Vector Regression”, In 2016 5th International Conference on Energy and Envi-ronmental Protection (ICEEP 2016), 699-704.
[17] Rastegarnia, A., Sohrabi-Bidar, A., Bagheri, V., Razifard, M., & Zolfaghari, A. (2017). “Assessment of Re-lationship Between Grouted Values and Calculated Values in the Bazoft Dam Site”, Geotech Geol Eng, 35, 1299–1310.
[18] Öge, İ. F. (2017). “Prediction of cementitious grout take for a mine shaft permeation by adaptive neuro-fuzzy inference system and multiple regression”, Engineering Geology, 228, 238-248.
[19] Rahimi, E., Teshnizi, E. S., Rastegarnia, A., & Al-shariati, E. M. (2019). “Cement take estimation using neu-ral networks and statistical analysis in Bakhtiari and Karun 4 dam sites, in south west of Iran”, Bulletin of En-gineering Geology and the Environment, 78(4), 2817-2834.
[20] Kayabasi, A., & Gokceoglu, C. (2019). “An Assessment on Permeability and Grout Take of Limestone: A Case Study at Mut Dam, Karaman”, Turkey. Water, 11(12), 2649, 10.3390/w11122649.
[21] Mu, W., Li, L., Yang, T., Yu, G., & Han, Y. (2019). “Numerical investigation on a grouting mechanism with slurry-rock coupling and shear displacement in a single rough fracture”, Bulletin of Engineering Geology and the Environment, 78(8), 6159-6177.
[22] Niu, J. D., Wang, B., Chen, G. J., & Chen, K. (2019). “Predicting of the unit grouting quantity in karst curtain grouting by the water permeability of rock strata”, Applied Sciences, 9(22), 4814, 10.3390/app9224814.
[23] Abdollahisharif, J., & Bakhtavar, E. (2019). “Using geo-statistical simulation to determine optimal grout injection pressure in dam foundation based on geo-mechanical characteristics”, Bulletin of Engineering Geol-ogy and the Environment, 78, 2253–2266.
[24] Mahab Ghods Consulting Engineers. (2010) “Engineering geological report, Feasibility study of Dam and Hydropower plant of Khersan II”, Iran Water and Power Resources Development Company.
[25] Deere, D. U., & Deere, D. W. (1989). Rock quality designation (RQD) after twenty years. Department of the Army U.S. Army Corps of the Engineers Washington, DC 20314-1000.
[26] Houlsby, A. C. (1976). “Routine interpretation of the Lugeon water-test”, Quarterly journal of Engineer-ing Geology and Hydrogeology, 9(4), 303-313.
[27] Bieniawski, Z. T. (1989). Engineering rock mass classifications: a complete manual for engineers and ge-ologists in mining, civil, and petroleum engineering. John Wiley & Sons, ISBN10: 0471601721, ISBN13: 9780471601722.